Welcome to PowerA Support

← Return to Main Site

Follow

How do I program and/or reset the advanced gaming buttons?

Programming the advanced-gaming buttons

  1. Hold the program button down for 2 seconds. The center LEDs will slowly flash red, signaling the controller is in program mode.
  2. Press 1 of the following buttons (A/B/X/Y/LB/RB/LT/RT/Left Stick Press/
    Right Stick Press) to relocate. The center LEDs will rapidly flash, signaling the controller is in record mode.
  3. Select 1 of the 4 Advanced-Gaming buttons. The center LEDs stop flashing, signaling the Advanced-Gaming button has been set to your button of choice.
  4. Repeat for the remaining Advanced-Gaming buttons.

Note: Programmed buttons will remain in memory even after disconnected.

 

Resetting the advance-gaming buttons

  1. Hold the program button down for 2 seconds. The center LEDs will slowly flash red, signaling the controller is in program mode.
  2. Press and hold the program button for 5 seconds to reset to no function.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk